Health & Saf. Code, § 25214.14

A package or a packaging component is exempt from the requirements of Section 25214.13, and shall be deemed in compliance with this article, if the manufacturer or supplier complies with the applicable documentation requirements specified in Section 25214.15 and the package or packaging component meets any of the following conditions:

(a) The package or packaging component is marked with a code indicating a date of manufacture prior to January 1, 2006.

(b) A regulated metal has been added to the package or packaging component in the manufacturing, forming, printing, or distribution process, to comply with the health or safety requirements of a federal or state law.

(c) (1) The package or packaging component contains no intentionally introduced regulated metals, but exceeds the applicable maximum concentration level set forth in subdivision (c) of Section 25214.13 only because of the addition of a recycled material.

(2) This subdivision, and all exemptions provided pursuant to it, expire on January 1, 2010.

(d) (1) A regulated metal has been added to the package or packaging component in the manufacturing, forming, printing, or distribution process for a use for which there is no feasible alternative.

(2) For purposes of this subdivision, “a use for which there is no feasible alternative” means a use, other than for purposes of marketing, for which a regulated metal is essential to the protection, safe handling, or function, of the package’s contents, and technical constraints preclude the substitution of other materials.

(e) (1) The package or packaging component is reused and contains no intentionally introduced regulated metals, but exceeds the applicable maximum concentration level set forth in subdivision (c) of Section 25214.13, and all of the following apply:

(A) The product being conveyed by the package, the package, or packaging component is otherwise regulated under a federal or state health or safety requirement.

(B) The transportation of the packaged product is regulated under federal or state transportation requirements.

(C) The disposal of the package is otherwise performed according to the requirements of this chapter or Chapter 8 (commencing with Section 114960) of Part 9 of Division 104.

(2) This subdivision, and all exemptions provided pursuant to it, expire on January 1, 2010.

(f) (1) The package or packaging component has a controlled distribution and reuse and contains no intentionally introduced regulated metals, but exceeds the applicable maximum concentration level set forth in subdivision (c) of Section 25214.13.

(2) This subdivision, and all exemptions provided pursuant to it, expire on January 1, 2010.

(g) (1) The packaging or packaging component is a glass or ceramic package or packaging component that has a vitrified label, and that, when tested in accordance with the Waste Extraction Test, described in Appendix II of Chapter 11 (commencing with Section 66261.1) of Division 4.5 of Title 22 of the California Code of Regulations does not exceed 1.0 ppm for cadmium, 5.0 ppm for hexavalent chromium, or 5.0 ppm for lead. A glass or ceramic package or packaging component containing mercury is not exempted pursuant to this subdivision.

(2) A glass bottle package with paint or applied ceramic decoration on the bottle does not qualify for an exemption pursuant to this section, if the paint or applied ceramic decoration contains lead or lead compounds in excess of 0.06 percent by weight.

(3) This subdivision, and all exemptions provided pursuant to it, expire on January 1, 2010.